Production of fine and finest flakes, wood powder and flour in wet and dry condition
Infeed material:
planer shavings, sawdust, flakes from knife ring flakers and knife shaft flakers, flakes from waste wood and reclaimed timber, annual plants, chopped waste paper, flakes from inorganic materials, pellets and prereduced briquettes
Humidity:
u = 2 - 80 %
Application:
Material utilization as core and surface layer flakes in particleboards, as filling and insulation material for the processing of annual plants, thermal utilization as blow-in dust and as thickener for substitute fuel
Material infeed:
Vibration conveyor, screw conveyor
Final product:
fibre shaped fine and finest flakes
Productive capacity:
1 - 8 t/h
Material discharge:
Pneumatically by full suction via machine front side
Accessories:
Heavy particle separator for the separation of metallic and mineral impurities, fine material screening in the infeed conveyor
Description:
The prereduced material will preferrably be fed to the machine by means of a vibration conveyor to equalize the material flow. The heavy particle separator with fan acting as cross-ventilation allows heavy particles to be eliminated from the material flow as far as possible. The material is seized by the rotor, is accelerated and disintegrated on the grinding tracks by impact effect. A control disc to divide the machine interior into two chambers, the speed of the machine and a bypass opening in the range of the full suciton unit offer the possibility to modify the processing time of the particles inside the machine and thus the degree of fineness of the final product.
